|
AquaweveTM
Reinforced, Woven Polyethylene
Pond Liners -
The Ultimate in Strength!
Ideal for lining large ponds - up to 60,000
square feet in one piece!
AquaWeve polyethylene liners are engineered to
offer great strength in a light weight liner material. The
material is UV stabilized to offer years of worry-free protection
against the damaging rays of the sun. Unlike regular multi-layered
liners which simply stack the layers of liner on top of each other,
AquaWeve liners are woven together. This gives the ultimate in
strength! In fact, AquaWeve liners have a tear strength of 60
P.S.I. and a burst strength of 600 P.S.I.. Because of its light
weight and ultimate strength, the AquaWeve liner material can be
manufactured in sizes up to 60,000 square feet in just one piece!
Unlike PVC liners which need 12" of soil over the
entire liner, these liners do not require coverage other than around the
edges. This lowers the overall installation cost dramatically!
Weight per 1000 square feet is 68 lbs. A $50.00 packaging fee is
added to the liner costs to cover protective materials used in shipping
the liner. Custom made liners require approx. 10 - 14 days for
manufacturing and delivery.
AquaWeve liners are factory
welded together in 6' wide panels. To eliminate waste, each liner
needs to have either the length or the width by a multiple of 6'.
Minimum size starts at 1,000 square feet. For smaller
liners, please check out our
45 mil EPDM liners.
Product Code: SCAW20
Minimum size required: 1,000 square feet
1,000 - 5,000 square feet: $.65 per
square foot
5,001 - 10,000 square feet: $.59 per
square foot
10,001 - 20,000 square feet: $.56 per
square foot
20,001 + square feet: $.53 per square
feet
|
