Quickplug Pond Heaters

Clepco has introduced a new line of industrial grade, stainless steel, submersible heaters for pond and water gardens.  Ideal for use in ponds, growing tanks, and koi holding tanks.  1 year manufacturer's warranty.

• Heaters must be used with GFI protection

• Titanium construction has 20' power cord with quick connect fitting for connecting to digital controller.  Safe for use in saltwater or freshwater!

• 20' power cord

• 1 Year Manufacturer's Warranty

The heaters below lay on the bottom of the pond.  They have a rubber protective 'bumper' around it at the top and bottom so the heater doesn't touch the bottom or sides of the pond.  They are safe to use in preformed plastic ponds or ponds made out of pond liner.  Must be kept submerged while plugged in.  Controller MUST be protected from the elements and from water getting in to it.

*Tip:  It takes 1000 watts of heater to heat 250 gallons of water 10°F.

Please allow approx. 7-14 days for S&H for the below heaters to ship.

We're sorry for the inconvenience.  The below heaters have become discontinued from the manufacturer and are no longer available.  We hope to offer new pond heaters in the future. 

Please consider using an aerator during the winter to keep your pond 'open' as an aerator can be less expensive to purchase AND operate.  An aerator has the extra benefit of being able to use year-round, too.  Check out our aerators here.

Water Heaters for Fish Tanks &
Recirculating Systems

Fresh or Saltwater

Quickplug Tank Heaters

These heavy duty, single tube, single phase heaters are UL listed and American made.  304 stainless steel for freshwater use or titanium for saltwater use.  Ideal for recirculating systems and other applications where automatically controlled temperatures are needed.  Great for portable applications!    These heaters feature a special mating plug which allows the heater to "Quick Plug" to the controller which controls the temperature of the unit.    The controller has a standard 115 volt plug, which connects to your outlet.   Simple and easy!  Each Quick Plug Heater is fused for protection against overheating (in case of low water).  Available in both stainless steel (for fresh water) and titanium (for salt water). 

It takes 1000 watts to add 10° for every 250 gallons of water.  Use this formula to determine the size of heater you need below.  For example, say your water is 45°F and you have a 250 gallon tank.  If you would like to keep your water at 75°F, then you would need 3000 watts to heat your water to 75°F.

The tanks below can be used outside but must be protected from the elements (weather).  They are used in tanks that have sides to them so the lip of the top of the unit can rest on the side of the tank.

Comes with tank mounting adapter and controller.  Controller MUST be protected from the elements and from water getting in to it.

1 Year manufacturer's warranty.